Metering Solutions supply water meters to the UK Markets that are designed for industrial/commercial, irrigation and domestic applications.  The comprehensive range of water meters are EEC Approved; this EEC Approval guarantees accuracy to the stated metrological class A, B, C & D.  Also available are WRAS/WRC Approved water meters for primary metering which are used for UK domestic applications.

Metering Solutions have available for immediate delivery ½” to 12” for cold water applications up to 30degC, ½” to 8” for warm water applications up to 90degC and ½” to 4” for hot water applications up to 120degC.  We can supply other sizes in all temperature ranges at quick delivery times.  Please note higher temperature ranges are available if required;

The meter designs vary from Single Jet , Multi Jet, Rotary Piston/ Volumetric, Woltmann, Paddle Wheel and Magflow; all water meters are supplied with local volume registers (dry dial, wet dial or liquid filled dial) and can be fitted with a calibrated pulse output in our workshop for immediate despatch.

Single Jet (SJ) water meters are ideal for sub/secondary billing for domestic applications, batch control and also water monitoring in industrial/commercial applications. Available in sizes 1/2" & 3/4".

SJ Water Meter (POLARIS C)

SJ Water Meter Class C - PDF File

The SJ Water Meter (POLARIS C) can be used for secondary (sub) metering in domestic and commercial applications as these are EEC class C approved to directive CEE 75/33 for the DN15 and MID class C approved to directive 2004/22/CE for the DN20.

Features include direct reading on 8 rollers rotating through 360 degrees (3 red digits for litres and 5 black digits for cubic meters, anti magnetic tampering device, super dial dial register, brass body, horizontal or vertical installation, working pressure up to 16bar and cold water up to 30degC. This model can be equipped with a pulse output (reedswitch) for batching or linking to remote monitoring equipment (i.e. counters, AMR systems. BMS (building management systems).

SJ Water Meter (SIRIUS C)

SJ Water Meter Class C - PDF File

The SJ Water Meter (SIRIUS C) can be used for secondary (sub) metering in domestic and commercial applications as these are EEC class C approved to directive CEE 75/33.

Features include direct reading on 5 rollers cubic meters housed within liquid filled protected rollers, brass body, horizontal or vertical installation, working pressure up to 16bar, cold water up to 30degC and available in 1/2" & 3/4" sizes. This model can be equipped with a pulse output (reedswitch) for batching or linking to remote monitoring equipment (i.e. counters, AMR systems. BMS (building management systems).

SJ Water Meter (POLARIS)

SJ Water Meter - PDF File

The SJ Water Meter (POLARIS) can be used for secondary (sub) metering in domestic and commercial applications as these are EEC class B/A approved to Directive 75/33/EEC.

Features include direct reading on 8 rollers rotating through 360 degrees (3 red digits for litres and 5 black digits for cubic meters, super dial dial register, brass body, horizontal or vertical installation, working pressure up to 16bar, cold (30degC) and warm (90degC) versions and available in 1/2" & 3/4" sizes.

Buy online at MVPF web shop at www.mvpfshop.co.uk/os commerce

SJ (Pulse) Water Meter (ANDROMEDA)

Back to top

SJ (P) Water Meter - PDF File

The SJ (P) Water Meter (ANDROMEDA) can be used for secondary (sub)metering in domestic and commercial applications as these are EEC class B/A approved to Directive 75/33/EEC. The SJ (P) is equipped with a pulse output (reedswitch) for batching or linking to remote monitoring equipment (i.e. counters, AMR systems. BMS (building management systems).

Features include direct reading on 5 rollers rotating through 360 degrees for cubic meters, super dial dial register, brass plated body, horizontal or vertical installation, working pressure up to 16bar, cold (30degC) and warm (90degC) versions and available in 1/2" & 3/4" sizes.

Rotary Piston/Volumetric water meters are ideal for sub/secondary billing for domestic applications, batch control and also water monitoring in industrial/commercial applications. These water meters are also WRAS approved and due to the operating principle are ideal for low staring flow rates and also strong resistance to over flow rates. Available in sizes 1/2" to 1 1/2" to metrological class C & D.

ALTAIR Concentric Water Meter

ALTAIR Concentric Water Meter - PDF File

The ALTAIR Concentric Water Meter can be used for secondary (sub)metering in domestic and commercial applications as these are EEC and WRAS class D approved to metrological standard OIML R49.

Features include direct reading on 8 rollers rotating through 360 degrees (3 red digits for litres and 5 black digits for cubic meters, anti magnetic tampering device, super dial dial register, brass body, working pressure up to 16bar and cold water up to 30degC. This model can be equipped with a pulse output for batching or linking to remote monitoring equipment (i.e. counters, AMR systems. BMS (building management systems) or radio module to the IZAR radio system.

ALTAIR Volumetric Water Meter

Back to top

ALTAIR Volumetric Water Meter - PDF File

The ALTAIR Volumetric Water Meter can be used for secondary (sub)metering in domestic and commercial applications as these are EEC and WRAS class C/D approved to metrological standard OIML R49.

Features include direct reading on 8 rollers rotating through 360 degrees (3 red digits for litres and 5 black digits for cubic meters, anti magnetic tampering device, super dial dial register, brass body, horizontal or vertical installation, working pressure up to 16bar and cold water up to 30degC. This model can be equipped with a pulse output for batching or linking to remote monitoring equipment (i.e. counters, AMR systems. BMS (building management systems) or radio module to the IZAR radio system.

Multi Jet (MJ) water meters are ideal for sub/secondary billing for domestic applications, batch control and also water monitoring in industrial/commercial applications, bore-hole and irrigation. Available in sizes 1/2" to 2".

MJ Water Meter - PDF File

The MJ Water Meter (SATURN) can be used for secondary (sub) metering in domestic and commercial applications as these are EEC class B/A approved to Directive 75/33/EEC.

Features include direct reading on 5 black digits for cubic meters & 4 spinning dials for litre consumption, super dial dial register, brass body (1/2" to 1 1/2") and cast iron (2"), horizontal or vertical installation, working pressure up to 16bar, cold (30degC) and warm (90degC) versions and available in 1/2" to 2" sizes.

Buy online at MVPF web shop at www.mvpfshop.co.uk/os commerce

MJ (P) Water Meter - PDF File

The MJ (P) Water Meter (ANDROMEDA) can be used for secondary (sub) metering in domestic and commercial applications as these are EEC class B/A approved to Directive 75/33/EEC. The MJ (P) is equipped with a pulse output (reed switch) for batching or linking to remote monitoring equipment (i.e. counters, AMR systems. BMS (building management systems).

Features include direct reading on 5 black digits for cubic meters & 4 spinning dials for litre consumption, super dial dial register, brass body (1/2" to 1 1/2") and cast iron (2"), horizontal or vertical installation, working pressure up to 16bar, cold (30degC) and warm (90degC) versions and available in 1/2" to 2" sizes.The SJ (P) is equipped with a pulse output (reed switch) for batching or linking to remote monitoring equipment (i.e. counters, AMR systems. BMS (building management systems).

433 / 434 Water Meter - PDF File

The 433 / 434 Water Meter (CORONA DP) can be used for proportional control of pumps, motors etc in industrial/commercial applications.

Features include direct reading on 5 black digits for cubic meters & 4 spinning dials for litre consumption, super dial dial register, brass body(1/2" to 1 1/2") and cast iron (2") , horizontal (433) or vertical rising (434) installation, working pressure up to 16bar, cold water up to 50degC and available in 1/2" to 2" sizes.The 434 / 434 are equipped with a pulse output (reed switch) for batching or linking to remote monitoring equipment (i.e. counters, AMR systems. BMS (building management systems).

413 / 414 Water Meter - PDF File

The 413 / 414 Water Meter (RAY) can be used for proportional control of pumps, motors etc in industrial/commercial applications.

Features include direct reading on 5 black digits for cubic meters & 4 spinning dials for litre consumption, super dial dial register, brass body (1/2" to 1 1/2") and cast iron (2"), horizontal installation, working pressure up to 16bar, hot water up to 120degC and available in 1/2" to 2" sizes.The 413 / 414 are equipped with a pulse output (reed switch) for batching or linking to remote monitoring equipment (i.e. counters, AMR systems. BMS (building management systems).

Back to top

402 / 403 Water Meter - PDF File

The 402 / 403 Water Meter (RAY) can be used for proportional control of pumps, motors etc in industrial/commercial applications; these are used extensively within the readymix concrete industry.

Features include brass body (1/2" to 1 1/2") and cast iron (2"), horizontal or vertical installation, working pressure up to 16bar, warm water up to 90degC and available in 1/2" to 2" sizes.The 402 / 403 are equipped with a pulse output (reed switch) for batching or linking to remote monitoring equipment (i.e. counters, AMR systems. BMS (building management systems).

Woltmann bulk water meters are ideal for sub/secondary billing for domestic applications, batch control and also water monitoring in industrial/comercial applications, bore-hole and irrigation. Available in sizes 2" to 12".

WPHN Water Meter - PDF File

The WPHN Water Meter (WOLTMANN) can be used for secondary (sub) metering in domestic and commercial applications as these are EEC class B approved to Directive 75/33/EEC. The WPHN can be pre-equipped with a pulse output (reed switch) for batching or linking to remote monitoring equipment (i.e. counters, AMR systems. BMS (building management systems).

Features include direct reading on black digits for cubic meters & 2 spinning dials for litre consumption, super dial dial register, cast iron body, horizontal or vertical installation, working pressure up to 16bar, cold (30degC) and warm (90degC) versions and available in 2" to 12" sizes.

Buy online at MVPF web shop at www.mvpfshop.co.uk/os commerce

222 WP Water Meter - PDF File

The 222 WP Water Meter (WOLTMANN) can be used for secondary (sub) metering in domestic and commercial applications as these are EEC class B approved. The 222 can be pre-equipped with a pulse output (reed switch) for batching or linking to remote monitoring equipment (i.e. counters, AMR systems. BMS (building management systems).

Features include direct reading on black digits for cubic meters & 2 spinning dials for litre consumption, super dial dial register IP68 rated, cast iron body, horizontal or vertical installation, working pressure up to 16bar, 25bar and 40bar, cold (30degC) and warm (90degC) versions and available in 2" to 20" sizes.

Back to top

233 WS Water Meter - PDF File

The 233 WS Water Meter (WOLTMANN) can be used for secondary (sub) metering in domestic and commercial applications as these are EEC class B approved. The 233 can be pre-equipped with a pulse output (reed switch) for batching or linking to remote monitoring equipment (i.e. counters, AMR systems. BMS (building management systems).

Features include direct reading on black digits for cubic meters & 2 spinning dials for litre consumption, super dial dial register IP68 rated, cast iron body, horizontal or vertical installation, working pressure up to 16bar, cold (30degC) and warm (90degC) versions and available in 2" to 6" sizes.

Irrigation, also known as paddle wheel, water meters are ideal for bore-hole and irrigation applications. These water meters are supplied with Test Certificates as standard which can be presented to the Environment Agency for abstraction compliance. Available in sizes 2" to 12".

Back to top

IGT Water Meter - PDF File

The IGT Water Meter (IRRIGATION) can be used for borehole, irrigation and dirty water application due to the 'paddle wheel' design internals; this allows debris up to 30% to pass through the water meter without causing damage. These are issued with test certificates which can be used for EA monitoring. The IGT can be pre-equipped with a pulse output (reed switch) for batching or linking to remote monitoring equipment (i.e. counters, AMR systems. BMS (building management systems).

Features include direct reading on black digits for cubic meters & 2 spinning dials for litre consumption, super dial dial register, cast iron body, horizontal or vertical installation, working pressure up to 16bar, cold water up to 30degC and available in 2" to 12" sizes.

Buy online at MVPF web shop at www.mvpfshop.co.uk/os commerce